Air Cooled Scroll DC Inverter Chiller and Heat Pump

Product

Showing all 40 results

  • Air Cooled Scroll DC Inverter Chiller and Heat Pump

    The YORK® YMAA and YMPA Series Air-cooled DC Inverter Scroll Chiller and Heat Pump have been designed to meet tomorrow’s efficiency standards today. Delivering performance beyond typical chiller and heat pump efficiency levels, the YORK® YMAA and YMPA Series meets or exceeds stringent regulatory requirements (see chart, below) through an optimized combination of YORK® efficiency-enhancing technologies.

    Quick View
  • BUILDING EFFICIENCY Energy Efficient Variable Speed EC Motor Fan Coil Unit Solutions Model YECFC

    Johnson Controls YORK® YECFC fan coil units are high efficiency, low profile, ceiling-mounted, concealed air conditioning units for both ducted and non-ducted HVAC system applications. They are designed, developed and tested in accordance with Australia and New Zealand regulations to meet the increasing energy efficiency levels demanded by today’s sustainable buildings.

    Quick View
  • CD-2xx-E00-00 Carbon Dioxide

    Wall mount – CO2 and temperature transmitter

    Johnson Controls offers a Carbon Dioxide (CO2) and temperature wall mount transmitter for measuring the CO2 levels and the relevant temperature. Optional with humidity measurment (CD-3xx-E00-00).

    Quick View
  • CD-3xx-E00-00 Carbon Dioxide

    Johnson Controls offers a Carbon Dioxide (CO2) and temperature wall mount transmitter for measuring the CO2 levels, relevant temperature and humidity.

    Quick View
  • CD-Px000 Carbon Dioxide

    Carbon dioxide gas (CO2) is a component of the earth‘s atmosphere. Although carbon dioxide is invisible and odorless, an increased CO2 content in the indoor air leads to fatigue and reduced concentration for humans.

    Quick View
  • EC MOTOR FAN YBAH-F

    Johnson Controls YORK® YBAH ECM seires ceiling mounted air units are high static pressure air-conditioning units using high efficiency EC motors.

    Quick View
  • EC MOTOR FAN YECAH

    Johnson Controls YORK® YECAH ceiling mounted compact cabinet fan coil units are high airflow and high static pressure air-conditioning units using high efficiency 355 mm diameter EC plug fan(s).

    Quick View
  • FD Series Programmable IP Controllers

    The EasyIO® FS Series high performance network controller control panel is a pre-wired, preassembled standard control panel that contains an EasyIO FS Series controller. This predesigned
    solution saves time and money because you avoid expensive and time-consuming field installations. You can also tailor the assembly to a variety of common applications for additional savings.

    Quick View
  • FX14 Analytics FX14 Supervisory Software

    Features

    • Web-Based User Interface
    • Adoption of Industry Standard Communication Protocols
    • Small, Compact and Modular design
    Quick View
  • FX14 Supervisory Software

    Features

    • Web-based user interface
    • Powerful security
    • Centralized enterprise‑wide information
    • Large storage repository for alarms, events, and histories
    Quick View
  • HIGH STATIC FAN COIL UNITS YDFC

    Johnson Controls YORK® YDFC fan coil units are ceiling mounted, high air flow, high static pressure air conditioning terminals. They are designed, developed and tested considering the tough weather conditions of the Gulf and their reliability makes them an ideal solution of year round air conditioning, heating and ventilating requirements.

    Quick View
  • Smart Flow Control Series

    The Smart Flow Control Series is the most efficient way to control technology advanced applications. Combining a 6-way valve with a smart programmable digital actuator, the Smart Flow Control Series delivers flow control performance and greater flexibility through sensor connection and extensive capabilities. Room control can be easily integrated into the actuator by connecting a NS8000 Network Sensor.

    Quick View
  • SMT Electric Fan Coil Thermostat

    The SMT Series offers a big bright display that provides feedback of the air conditioning status. A user can easily turn the air conditioning on and off and adjust temperature/fan control. If the optional occupancy module is fitted, the SMT Series will automatically change to a low energy consumption mode when the room is vacant. The optional outside door station module further adds to the capability of the SMT Series by providing the user with the ability to call for housekeeping or request that they are not disturbed.

    Quick View
  • T7600 Modbus® FANCOIL THERMOSTATS

    The T7600 Series Modbus® LCD thermostats are designed to control heating and cooling through air conditioning unit in commercial and residential application. Typical applications include the control of fancoil units, floor heating, packaged terminal air conditioners and combination of heating and cooling equipment.

    Quick View
  • T9 Series Electric Fan Coil Thermostat

    With a frameless large touch screen, the T9000 series thermostats can display ambient temperature clearly and intuitively. The buttons are sensitive and very user-friendly. The futuristic and hi-tech exterior design is loved by users from high-end office buildings, hotels, private hospitals and high-end residential buildings.

    Quick View
  • Terminal Unit Valves J-SERIES

    J Series Electric Zone Valves accurately control the flow of saturated steam, hot water, or chilled water through coils and heat exchangers of all types

    Quick View
  • V6W0000 Terminal Unit Valves

    The V6W0000 line consists in six-way ball valves used for HVAC 4 pipes applications to automatically carry out the winter-summer change-over or, potentially, the control of radiant ceilings, fan coils and chilled beams.

    Quick View
  • VA-7080 Thermal ON/OFF Control

    The VA-708x Terminal Unit Actuators Series provide ON/OFF and DAT control in HVAC application. The compact design of these actuators make them suitable for installations in confined spaces, such as fan-coil applications.

    Quick View
  • VA-7090 Thermal 0…10 V Control

    The VA-709x Series Terminal Unit Valve Actuators provide Proportional Control in HVAC application. The compact design of these Actuators makes them suitable for installations in confined spaces, such as fan-coil applications. Moreover, thanks to an innovative fixing system, the VA-709x is suitable for almost all the Terminal Unit Valves in the market.

    Quick View
  • VAV BOX RVP-BOXES

    VAV terminal boxes are capable of regulating and maintaining environmental comfort in a variable flow system by controlling the air flow in the best way. This type of system allows you to control ventilation and air conditioning directly in rooms, according to the real flow needs and the cool-heat requirements.

    Quick View
  • VAV BOX TSS-TSL

    Model TSS/TSL terminals provide variable air volume (VAV) control beyond the typical single duct box. They are specifically designed for precise air delivery throughout the entire operating range, regardless of the installed inlet conditions. They also offer improved space comfort and flexibility for a wide variety of HVAC applications.

    Quick View
  • VAV BOX TVS-TVL

    Model TVS/TVL fan terminals are specifically designed for quiet operation. They also offer improved space comfort and flexibility for a wide variety of HVAC systems. This is critical in today’s buildings, where occupants are placing more emphasis on indoor acoustics.

    Quick View
  • VG1600 Terminal Unit Valves

    The newest patented Johnson Controls 270° 6-way valve is designed to regulate the flow in an easy and most efficient way of both hot and chilled water in response to the demand of a controller in HVAC systems. It substitutes either four through valves or two through valves and one change-over valve. Available in ½” size, the valve is supplied at maximum KV (3.3) but a smaller KV can be obtained by installing one of the flow disks included in the valve box.

    Features

    • Unmatched flow rate (maximum Kv 3.3)
    • Interchangeable flow disks (Kv: 2.5 – 1.6 – 1.0 – 0.63)
    • Dual stainless steel AISI 304 ball and stem
    • Leakage rate A, air-bubble-tight
    • Tested for 100,000 full stroke cycles at harsh water conditions with 900 ppm of iron oxide
    • Overpressure system to prevent any damage in the terminal unit circuit
    Quick View
  • VG3000 Terminal Unit Valves

    The VG3000 brass valve series is primarily designed to regulate the flow of water in response to the demand of a controller in zone and terminal unit applications. The valves are available in 2-way, 3-way mixing and 3-way mixing with built-in by-pass configurations.

    Quick View
  • X-Power Series YCAE-X/YCAE-XH Modular Air-Cooled Chillers and Heat Pumps

    YORK® delivers efficient, reliable cooling and heating solutions to reduce your energy costs and maximize uptime.

    Our customer care gives you complete peace of mind. Johnson Controls prides itself on being the largest service and preventative maintenance organization in the world.

    YORK® X-Power Series YCAE-X/YCAE-XH Modular Air-Cooled Chillers and Heat Pumps are based on innovative designs that guarantee exceptional performance. Decades of experience and expertise make YORK® an industry-leading manufacturer of modular chillers.

     

    Quick View
  • YBAH-G CEILING AIR HANDLING UNIT

    With integrity, YORK® advances with time and forges the future by providing professional air treatment system solutions in various applications to meet the diverse needs of green, energy saving, environmental protection and intelligent buildings.

    We listen carefully to understand our customer needs and are committed to technological development and innovation. We work with authoritative experts to create high-quality, high-performance equipment and a full range of service.

    Quick View
  • YBCM Series Air Handing Units

    YBCM Series Air Handling Units

    YBCM series air handling unit is a terminal equipment of central air-conditioning system. They are designed to cool, heat, humidify, and clean the air. The whole series is especially suitable for hotel, gymnasium, office, store, factory etc.

    YBCM series air handling unit is designed to provide six standard types for our customers: Vertical standard unit(V1), Horizontal standard unit(H1/H2/H3/H4/H5).

    Quick View
  • YBFC Fan Coil Units

    YBFC high-efficiency fan-coil units are divided into two major series – ceiling concealed installation and vertical concealed installation.

    Quick View
  • YBFC-CB_CD 2R (BLDC)

    YBFC high-efficiency fan-coil units are divided into two major series – ceiling concealed installation and vertical concealed installation. Each range has 2 or 3 pipes for selection, each with 10 models. Under standard working conditions the airflow ranges from 180m3 /h to 2380m3 /h (high speed), the cooling capacity ranges from 1.78 to 12.94kW, and the heating capacity ranges from 1.63 to 21.74kW. There is a wide range of products, so the different needs of customers can be met. The products are rigorous in design and meticulous in manufacturing; novel in style and advanced in structure; they have high performance, low noise, low power consumption, and high safety and reliability, and they offer easy maintenance and installation.

    Quick View
  • YBSE Series Air Handling Units

    Professional Air Solutions

    With integrity, YORK® advances with time and forges the future by providing professional air treatment system solutions in various applications to meet the diverse needs of green, energy saving, environmental protection and intelligent buildings.

    We listen carefully to understand our customer needs and are committed to technological development and innovation. We work with authoritative experts to create high-quality, highperformance equipment and a full range of service.

    Quick View
  • YCAE-X

    A chiller (cooling water circulation device) is a general term for a device that controls the temperature by circulating a liquid such as water or heat medium as a cooling liquid whose temperature was adjusted by the refrigerant cycle. … It is referred to as a “chiller” because it is often used for cooling.

    Quick View
  • YCWE-E Series Water-Cooled Modular Scroll Chillers

    The YORK® YCWE-E Series of Water-cooled Chillers are designed for energy-efficiency, reliability and sustainability. The YCWE-E Series is modular design – making it perfect for retrofits and new construction.

    Quick View
  • YGWS WATER-COOLED SCREW CHILLER

    In order to meet continuously changing and increasing HVAC market requirement, Johnson Controls introduces the brand new HFC-134a water-cooled screw chiller YGWS. YGWS offers optimized efficiency at a more competitive price range, with benefit of flexibility, reliability and sustainability. The chiller is suitable for the light commercial market, i.e. hotels, retail stores, small and medium-sized factories, hospitals etc.

    Quick View
  • YGWS WATER-COOLED SCREW CHILLER

    In order to meet continuously changing and increasing HVAC market requirements, Johnson Controls introduces the brand new HFC-134a water-cooled screw chiller YGWS. YGWS offers optimized efficiency at a more competitive price range, with the benefit of flexibility, reliability, and sustainability. The chiller is suitable for the light commercial market, i.e. hotels, retail stores, small and medium-sized factories, hospitals, etc.

    Quick View
  • YMAE Series Air-Cooled Full DC Inverter Modular Chiller and Heat Pump

    Real comfort and true peace of mind

    YORK high-performance chillers and heat pumps are paired with the correct terminal devices and equipped with advanced intelligent controls to create a unique water ecosystem. Through high-tech system control, you can adjust the operation of each component, which allows customers to enjoy a comfortable life with the peace of mind that comes with knowing you have chosen the very best.

    Quick View
  • YMU-MOBILE HEPA

    YORK® Mobile HEPA Air Handling Unit YMU series is a movable, self-contained high efficiency particulate air (HEPA) filtration system with an ultraviolet (UV) lamp that helps to disinfect the air.

    Quick View
  • YSM-EC MOTOR FAN

    The YSM series double skin air handling unit (AHU) consists of 81 models with air volumes ranging from 1,200 ~ 99,180m3/h and standard internal static pressures as high ±1000 Pa (for 25/50mm thickness panel), to ensure maximum flexibility and the best solution for your application.

    Quick View
  • YTM-AC MOTOR FAN

    YORK® advances with time and forges the future by providing professional air treatment system solutions in various applications to meet the diverse needs of green, energy saving, environmental protection and intelligent buildings.

    Quick View
  • YVAG Air-Cooled DC Inverter Reversible Heat Pumps

    Our new YORK® YVAG is designed for real world efficiency. Part load performances meet the highest efficiency values and delivers performance beyond typical heat pump efficiency levels in cooling and heating.

    Quick View
  • YVAG Heat Recovery Air-Cooled Inverter Heat Pumps

    Exploring the benefits
    • High performance – low costs
    • Flexible heating and cooling operations
    • Full DC inverter
    • Integrated design
    • Enjoy enhanced spaces

    Quick View
X